Positive Pressure System with Air Conditioning

Product Details:

Share Your Product:

Get a Price/Quote

Request To Call Back Send Inquiry

Product Description

This system is the modern substitute of centralized cooling HVAC system, which had the drawback of cross infection and cross contamination. Al-Med Equipments has designed a unique ductless positive pressure system designed as per NABH Norms which is flawless in design. For the first in the field of hospital OT, we have incorporated the concept of air conditioning. The system is now called DUCTLESS POSITIVE PRESSURE SYSTEM WITH AIR CONDITIONER.

Our design fulfill the following NASH requirements for Air Changes Per Hour

NASH guidelines for superspeciality OT "minimum total air change should he 20 based on international guidelines" although the same will depend on the biological load.
The fresh air component of Air Change is required to he minimum five air changes out of total minimum 30 air changes (ACM). We consider the superspeciality norms.

Technical Specifications

PARTICULARS	DESCRIPTION
Unit Size	1000 mm X 1000 mm X 1000 mm (Lx W x H)
Minipleat HEPA Filter	Size : 915 mm X 406 mm X 75 mm (Lx W x D)
	Quantity : 1 no.
	99.99% efficiency down to 0.3 micron
Pre-Filter Size :	915 mm X 406 mm X 25 mm (Lx W x D)
	Quantity : 1 no.
	90% efficiency down to 5 micron
	3 layer NWP sandwiched between 2 layers of HOPE Net
Blower Motor	Rating : 1 HP, 1440 RPM Single Phase Running At 220 Volt AC 50/60 Hz
	Mounting : Incorporated With Aluminium Impellers Within Powder Coated Mild Steel Housing
	Noise Level : Less Than 68 Decibels And Suspended On Spring To Give Minimum Vibration
Lighting	Ozone Producing Ultra Violate Germicidal Light Of 3 Feet Length In The Position Of Suction
Electrical	Input AC : 220 - 240 Volts Single Phase For 2 Tons PPCS And Three Phase For 3 Tons PPCS
	All Wires Are Covered By PVC Spiral Bindings To Ensure Better Safety.
Performance	Dust Count Exceeds Class 100 In Sealed OT. Requirement As Per ISO 14644.
Vibration	0.001 Inches Average On Work Table
Chilling Coil	812 mm X 381 mm 3 Rows For 2 Tons